manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 68 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 68

   Facsimile

5.5 

Protective Mechanism

5.5.1 Data battery backup function

If 

 is   power outage or if the 

 is turned off, the data stored in the control

 is retained since the lithium battery function 

 a data battery backup.

 

 

For details on the 

 

 see Chapter 1: 5.4 

 

on Page l-47.

__

REFERENCE

5.5.2 BJ cartridge maintenance features

a) Cleaning

To maintain high printing quality, the fax unit has a cleaning feature that wipes off dust
from the 

 cartridge nozzles with a head 

 and fills the nozzles with fresh ink.

b) Nozzle 

capping

The fax unit caps the 

 cartridge nozzles with the Capping section cap after the carriage

returns to the front of the 

 section 

 the right side. This protects the nozzles

from dust and prevents the ink from drying out or leaking.

c) Maintenance jet

The fax unit has a maintenance 

 

 

 

 ink from all the ink 

nozzles to the 

 unit,. This prevents the nozzles from clogging and ensures high

printing quality.

l-54

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments