manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 185 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 185

Chapter   General Description

Built-in BJ color printer design

The build-in printer works the same as the Bubble jet Full-color printer. This space-saving

design occupies a minimum of desk space and makes it easy to work with the facsimile.

Convenient paper handling

The printer is equipped with an automatic sheet feeder that holds up to 100 sheets of

 size Plain paper.

Printing is also possible on Coated paper, Transparency, Envelope, Back print film, Glossy

paper, High gross film, Fabric sheet.

Excellent prlnt quality

The 

high-performance print head of 

 ink cartridge offers 720   360 dots per inch 

 for

high resolution graphics.

Automatic printer ON/OFF

When you print data using the 

 Server   

 printer driver under

Windows, the printer mode changes automatically and returns to fax mode after printing.
(The printer is turned on and off by means of 

l-l

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments