manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 146 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 146

Part 1: Facsimile

6.2 

Service Test Functions

The 

fax functions for testing individual operations, such as below.

See Page 3-39 for details of entering the test mode. To leave the test mode, press the

 button, and then   button.

6.2.1 Test mode overview

Test mode can be executed by following the menu items from the display.
a) 

DRAM tests

Writes data to 

 image storage areas and reads that data to check operations.

b) 

 test

 test is used to enter the contact sensor’s shading data

c) 

 test

Prints nine different patterns within the print area.

d) Modem, NCU tests

The 

frequency test and the 

 signal transmission and CNG signal and DTMF signals

reception tests.

e) 

Faculty tests

Test the operation of operation panel and sensor functions.

3-44

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments