manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 2 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 2

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,
maintenance, and repair of products. This manual covers all localities where the products 

 sold. For this

reason, there may be information in this manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies   typographical errors due to improvements   changes in

products. When changes occur in applicable products or in the content of this manual, Canon will release
technical information as the need arises. In the event of major 

 in the contents of this manual 

 

long   short period, Canon will issue   new editions of this manual.

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product 

 and company names described in this manual are the registered trademarks of the

individual companies.

Copyright

This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be
copied, reproduced   translated into another language, in whole   in part, without the written consent of
Canon Inc..

Copyright   1997 by Canon Inc.
CANON INC.

Office Imaging Products Technical Support Dept. 2

 Hakusan 

 Toridecity, lbaraki 302, Japan

DTP 

System

This 

 was 

 on   Apple Macintosh” personal computer, final pages 

 printed on Canon

SUPER LASER SHOT 

 PS.

All graphics 

 produced with Macromedia 

All 

 and all page layouts 

 created with 

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments