manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 104 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 104

Chapter 3: Maintenance   Service

1   Consumables

Level

BJ cartridge

When

When 

“REPLACE CARTRIDGE” is 

displayed or

(BC-20 

 BC-21 

 BC-22) when ink has run out.

INK cartridge
(BCI-21 Color

 BCI-21 Black)

When using 

 either the “YMC

color” or “Black” ink cartridge has run out.

Service Technician None

Using 

 BC-22e BJ cartridge

a 

BC-21e 

and BC-22e BJ cartridges are improved versions of BC-21 and BC-22

_ 

cartridges, respectively. They are designed to be backward compatible with

NOTE

existing machines which use the BC-21 or BC-22; therefore, they can be used
with this machine, although full use of their new features is not possible.

1.2 Cleaning

For the cleaning procedure, see 2. HOW TO 

CLEAN PARTS on page 3-4

Level

Main unit outer covers When 
Printer platen

Separation roller

When ink adheres to the platen.

 document separation performance

deteriorates.

Document feed/eject

When document feed/eject performance

roller

deteriorates.

Separation guide

When document separation performance

deteriorates.

Scanning glass

 sensor)

When black vertical stripes
appear in copied or transmitted images.

White sheet

When the color or brightness of the copied or

transmitted image is not normal.

Service Technician None

3-1

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments