manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 161 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 161

Chapter 3: Maintenance   Service

7.1.2 

Service report output functions

The fax outputs service data setting status, past communications history reports.

a) List 

of service reports

The fax outputs the service reports shown below.

Report type

1. System data list
2. System dump list

Operations
In the service mode, select the 

 REPORT 

and the

desired numeric button 0 to 2.
Pressing buttons 1 to 2 outputs the respective service
reports on the left.
When pressing button 0, both are output.

Service activity report

If you set bits 0 and 1 of 

 

 SW01 in the service

(with service error code

mode, the service error code and dump list are indicated

and dump list)

on the activity report (sending/receiving).

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments