manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 76 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 76

 1: Facsimile

 feed motor drive switching

Power from the paper feed motor is switched 

for 

separation and feed of the

paper, and nozzle cleaning mechanisms by the direction of paper feed motor
rotation, the slide lock pin on the purge unit and swing gear. When the
carriage moves in front of the purge unit, the carriage pushes the control pin,
and releases the swing gear driven by the paper feed motor. 

 the paper

feed motor rotates in the paper feed direction in this state, the swing gear
rotates and 

 up to 

 auto sheet feeder drive gear to drive the auto sheet

feeder. Alternately, when the paper feed motor rotates in the reverse direction,
the swing gear rotates and moves up to the purge drive 

 to drive the purge

unit.
When the control pin is locked, the paper feed roller is driven to feed the paper.

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments