background image

 

9 . . .

 

Important Safety Precautions

CAUTION 

(Continued)

 

Air bags are designed to be 
used with the safety belts. Even 
with an air bag, if you are in a 
crash and not wearing a safety 
belt, your injuries could be 
much worse.

If you are too close to an inflat-
ing air bag, it could seriously 
injure you. Safety belts help 
keep you in position in case an 
air bag inflates in a collision. 
The driver should sit as far back 
as possible while still able to 
maintain control of the vehicle.

The path of an inflating air bag 
must be kept clear of any 

 

objects at all times.

CAUTION 

(Continued)

 

When an air bag inflates, it 
leaves dust in the air. This dust 
could cause breathing prob-
lems for people with a history of 
asthma or other breathing trou-
ble. To avoid this, everyone in 
the vehicle should get out as 
soon as it is safe to do so. If you 
are unable to get out of the 
vehicle, then open a window or 

 

door.

 

Children and Safety Restraints

CAUTION

 

Never hold a baby in your arms 
while riding in a vehicle. During 
a crash a baby will become so 
heavy you can’t hold it. For 
example, in a crash at only 
40 km/h, a 5.5 kg baby will 
suddenly become a 110 kg 
force on your arms. The baby 
would be almost impossible to 
hold. Secure the baby in an 

 

infant restraint.

 

$10araEscalade.fm  Page 9  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews: