manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual, Page: 238 / 421

Share
Download
Cadillac Escalade Owner'S Manual Download Page 238

Seats and Restraints

. . . 238

• If the seat has an adjustable 

head restraint or head rest and 
the child restraint has a single 
top strap, route the top strap 
under the head restraint or 
head rest between the posts.

• If the seat has an adjustable 

head restraint or head rest and 
the child restraint has a dual 
top strap, route the top straps 
around the head restraint or 
head rest.

Consult the manufacturer’s 
instructions for the child restraint 
to determine when and how to 
tighten the top strap.

SECURING A CHILD RESTRAINT 
WITH LOWER ATTACHING 
POINTS AND TOP STRAP

CAUTION

Do not leave children 
unattended in the vehicle.

Children left unattended could 
play with the safety belts. The 
belt could become wrapped 
around the child’s neck and 
continue to tighten. The child 
could be injured or killed.

Never allow children to play 
with the safety belts.

$10araEscalade.fm  Page 238  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments