manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual, Page: 70 / 421

Share
Download
Cadillac Escalade Owner'S Manual Download Page 70

Instrumentation and Controls

. . . 70

EXITING PROGRAMMING 
MODE

To exit programming mode, do 
any of the following:

• Turn off the ignition.

• Press the driver information 

center trip/fuel information 
button or vehicle information 
button.

• Press the   customization 

button repeatedly until the 
following message appears on 
the display:

-

PRESS 

 TO EXIT FEATURE 

SETTINGS

 (press 

 to exit 

feature settings)

- Press the 

 button to exit the 

menu.

• Do not press any buttons.

The display will time out after 
40 seconds of inactivity.

Compass (If equipped)

With the ignition on, the compass 
reading will appear in the driver 
information center display when-
ever the trip/fuel information 
menu is active.

As you are driving, 

N

 (North), 

NE

 

(North East), 

E

 (East), 

SE

 (South 

East), 

S

 (South), 

SW

 (South West), 

W

 (West) or 

NW

 (North West) 

should appear on the display to 
show your vehicle's direction.

If, after a few seconds, the reading 
does not appear, the compass may 
need calibration.

There may be a strong magnetic 
field (from various magnetic 
objects on the vehicle) interfering 
with the compass.

Turn off the engine, move the 
magnetic objects, then restart the 
engine and calibrate the compass.

If 

CAL

 appears in the Driver 

Information Center display, the 
compass needs calibration.

See "Compass Calibration" later in 
this section for more information.

It may be necessary to adjust the 
compass to compensate for 
compass variance.

If an incorrect reading is displayed, 
first check that the compass is set 
to the correct variance zone. If it is, 
the compass may need calibration.

See "Compass Variance" later in 
this section for more information.

$10araEscalade.fm  Page 70  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments