manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual, Page: 362 / 421

Share
Download
Cadillac Escalade Owner'S Manual Download Page 362

Service and Maintenance

. . . 362

CAUTION

If you use bias-ply tires on your 
vehicle, the wheel rim flanges 
could develop cracks after 
many miles of driving. A 
tire and/or wheel could fail 
suddenly, causing a crash. Use 
only radial-ply tires with the 
wheels on your vehicle.

TIRE CHAINS

CAUTION

Do not

 use tire chains.

They could damage your 
vehicle because there is not 
enough clearance.

Tire chains used on a vehicle 
without the proper amount of 
clearance can cause damage to 
the brakes, suspension or other 
vehicle parts. The area 
damaged by the tire chains 
could cause you to lose control 
of your vehicle and you or 
others may be injured in a 
crash.

NOTICE

 (Continued)

Use another type of traction 
device only if its manufacturer 
recommends it for use on your 
vehicle and tire size combina-
tion and under your road 
conditions. Follow that manu-
facturer’s instructions.

If you do find traction devices 
that will fit, install them on the 
rear tires.

To help avoid damage to your 
vehicle, drive slowly, don’t spin 
your wheels and readjust or 
remove the device if it contacts 
your vehicle.

SPARE TIRE

See "Spare Tire" in Section 5 for 
information.

$10araEscalade.fm  Page 362  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments