manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual, Page: 197 / 421

Share
Download
Cadillac Escalade Owner'S Manual Download Page 197

197 . . .

–

–

Section 

2

UNFOLDING THIRD ROW SEATS

Before unfolding the seat, always 
make sure that nothing will be 
trapped under the seat.

To return the seat to its original 
position:

1. Open the liftgate.

2. From the rear of the vehicle, 

lift the lever located on the 
rear of the seat, next to the 
handle.

3. To unfold the rear seat, pull 

the seat unit down until it 
locks into place.

4. To raise the seatback, lift it up 

and push it until it locks into 
place.

The seatback cannot be raised 
to the upright position unless 
the seat is secured to the floor.

CAUTION

If the seatback isn't locked, it 
could move forward in a 
sudden stop or crash. That 
could cause injury to the person 
sitting there. Always push and 
pull on the seatback to be sure 
it is locked.

5. Push and pull on the seatback 

to check that it is locked into 
place.

REMOVABLE REAR SEAT

To remove the third row seat:

1. Open the liftgate.

2. Lift the lever on the bottom 

rear of the seatback on the 
outboard side.

The seatback will fold forward.

The seat cannot be removed 
unless the seatback is folded.

$10araEscalade.fm  Page 197  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments