manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual

The Cadillac Escalade Personalization Manual is a comprehensive guide that allows owners to customize and personalize their luxurious vehicle to their exact preferences. This essential manual is available for free download from our website, providing easy access to all the instructions and tips needed to enhance your Escalade ownership experience.

Share
Download
background image

Service and Maintenance

. . . 350

22-Inch Tires

If your vehicle is equipped with the 
22-inch P285/45R22 size tires, 
they are low-profile tires with a 
wide tread design. They are not 
recommended for off-road driving 
or commercial uses such as snow 
plowing.

See the following in Section 3 for 
more information:

• Off-Road Driving

INFLATION

See the tire information label 
for your vehicle's tire inflation 
specifications.

To determine the location of your 
vehicle’s tire information label, see 
"Vehicle Loading" in Section 3.

The label gives the correct inflation 
pressures for your tires when 
they're cold. Cold means your 
vehicle has been sitting for three 
hours or more - or, if driven at all, 
for no more than 1.5 km.

The air pressure indicated on the 
label as "cold" should be 
maintained for the tires to perform 
properly. However, do not 
overload your vehicle. See "Vehicle 
Loading" in Section 3.

Maintaining the cold tire pressure 
indicated on the tire information 
label leads to better fuel economy, 
longer tire life, a more comfortable 
ride and better overall driveability.

Check your tires at least once a 
month. Don't forget your spare 
tire.

Note:

If you replace the original tires 
on your vehicle with tires of a 
different size, the pressure listed 
on the tire information label 
may not be correct. Be sure to 
determine the correct tire 
pressure for the size of the tires 
on your vehicle.

$10araEscalade.fm  Page 350  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade

B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Alfa Romeo FIX&GO automatic Manual preview
FIX&GO automatic
Brand: Alfa Romeo Pages: 40
WABCO TP2205 Installation Manual preview
TP2205
Brand: WABCO Pages: 48
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
Ford 2004 Freestar Workshop Manual preview
2004 Freestar
Brand: Ford Pages: 8
Intec CVD500LCD Installation And Operation Manual preview
CVD500LCD
Brand: Intec Pages: 16
Kia CADENZA 2017 Features & Functions Manual preview
CADENZA 2017
Brand: Kia Pages: 58
ULTIMATE SPEED 290923 Operation And Safety Notes preview
290923
Brand: ULTIMATE SPEED Pages: 56
Volvo 30795637 User Manual preview
30795637
Brand: Volvo Pages: 92
Suzuki SX4 2016 Owner'S Manual preview
SX4 2016
Brand: Suzuki Pages: 504
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Tobe EPS-LD SafePark Technical Data preview
EPS-LD SafePark
Brand: Tobe Pages: 2
Honda Civic Hatch 2017 Owner'S Manual preview
Civic Hatch 2017
Brand: Honda Pages: 687
Tuff Tonneaus Bunji Ute Installation Instructions preview
Bunji Ute
Brand: Tuff Tonneaus Pages: 4

Brands by name

Popular brands

Load more brands