Cadillac Escalade Owner'S Manual Download Page 239

Page: 239 / 421

239 . . .

–

Section

CAUTION

(Continued)

After installing a child restraint,
pull the shoulder belt all the
way out of the retractor to set
the lock (if equipped).

Secure any unused safety belts
behind the child restraint so
children cannot reach them.

NOTICE

Contact between the child
restraint’s lower attachment
parts and the vehicle’s safety
belt assembly may result in
damage.

If necessary, move the fastened
safety belt so that the belt
assembly and the lower attach-
ment parts do not rub together.

NOTICE

Folding an empty rear seat with
the safety belts secured may
cause damage to the safety belt
or the seat.

Always remember to return the
safety belts to their normal,
stowed position before folding
the rear seat.

To secure a child restraint
designed for this system, use the
following procedure:

1. Locate the anchors where the

seatback meets the back of
the seat cushion.

2. Place the child restraint on the

seat.

3. Attach the child restraint’s

attachment points to the
anchors in the vehicle, and
tighten as necessary. Follow
the instructions that come
with the restraint.

$10araEscalade.fm Page 239 Wednesday, October 14, 2009 9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Search results

Summary of Contents for Escalade

Reviews:

Cadillac Escalade, Owner'S Manual, Page: 239 / 421

Search results

Summary of Contents for Escalade

Reviews: