manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual, Page: 191 / 421

Share
Download
Cadillac Escalade Owner'S Manual Download Page 191

191 . . .

–

–

Section 

2

CAUTION

A safety belt that is twisted or 
improperly attached or routed 
won't provide the protection 
needed in a crash. After raising 
a rear seatback, always make 
sure that the safety belts are 
not twisted and that they are 
properly attached and routed.

EASY ENTRY/EXIT SEAT

The second row seats in your 
vehicle can be folded forward. 
Use this feature for exiting and 
entering third row seats.

Before folding a seat, always make 
sure that there is nothing under or 
in front of the seat.

Clear all items off the seat.

NOTICE

Damage to the rear seat or 
safety belts can occur if the seat 
is folded with the safety belts 
fastened.

Before folding a seat, unbuckle 
the safety belts and return 
them to their normal stowed 
positions.

Manual Easy Entry/Exit Seat (If 
equipped)

To enter the third row seat:

• Fold and tumble the seat.

See the following, earlier in this 
section, for more information:

• Folding Second Row Seats

- Manual Fold and Tumble Seat 

(If equipped)

$10araEscalade.fm  Page 191  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments