manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual

The Cadillac Escalade Personalization Manual is a comprehensive guide that allows owners to customize and personalize their luxurious vehicle to their exact preferences. This essential manual is available for free download from our website, providing easy access to all the instructions and tips needed to enhance your Escalade ownership experience.

Share
Download
background image

Seats and Restraints

. . . 186

Head Restraints

The front and rear head restraints 
are adjustable.

Pull the head restraint up to raise 
it.

The top of the restraint should be 
at the same height as the top of 
your head.

This position reduces the chance 
of a neck injury in a collision.

The front head restraints lock into 
place when raised. To release and 
lower a restraint, press the button 
located at the top of the seatback.

Push down on the head restraint 
to make sure it is locked in place.

To adjust a rear head rest to the 
proper height, slide the head rest 
up or down.

CAUTION

If a head restraint is not 
installed on the seatback, 
adjusted properly or stored in 
the vehicle properly, it could 
cause serious head and neck 
injuries during a collision.

Make sure the head restraint is 
installed on the seatback and 
properly adjusted before 
driving.

$10araEscalade.fm  Page 186  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade

Jacob Jensen Electronic Parking Disc II User Manual preview
Electronic Parking Disc II
Brand: Jacob Jensen Pages: 28
Yakima K800 Instructions Manual preview
K800
Brand: Yakima Pages: 8
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
Subaru 2007 Impreza Brochure & Specs preview
2007 Impreza
Brand: Subaru Pages: 21
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
TAUBENREUTHER 29-T080301 Quick Start Manual preview
29-T080301
Brand: TAUBENREUTHER Pages: 8
Meta System FrontPlate4 Manual preview
FrontPlate4
Brand: Meta System Pages: 16
Yakima K1249 Instructions Manual preview
K1249
Brand: Yakima Pages: 9
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
Quadratec QuadraTop 11051.0415 Installation Manual preview
QuadraTop 11051.0415
Brand: Quadratec Pages: 8
Packard 1948 eight Operating Instructions Manual preview
1948 eight
Brand: Packard Pages: 25
BMW M3 SEDAN Owner'S Manual preview
M3 SEDAN
Brand: BMW Pages: 392
Curt Manufacturing 13434 Installation Instructions preview
13434
Brand: Curt Manufacturing Pages: 4
ULTIMATE SPEED 290923 Operation And Safety Notes preview
290923
Brand: ULTIMATE SPEED Pages: 56
Lexus 2010 RX 350 Warranty And Services Manual preview
2010 RX 350
Brand: Lexus Pages: 82

Brands by name

Popular brands

Load more brands