manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual, Page: 39 / 421

Share
Download
Cadillac Escalade Owner'S Manual Download Page 39

39 . . .

–

Section 

1

Low Tire Pressure Light

This light should come on briefly 
as you start the engine, as a check 
to show you it is working properly.

If it doesn't come on, then have it 
fixed so it will be ready to warn 
you if there is a problem.

After the initial bulb check, this 
light appears when the Tire 
Pressure Monitor detects a low 
pressure condition in one or more 
of the road tires.

The 

TIRE LOW ADD AIR TO TIRE

 

(tire low add air to tire) message 
will also appear on the driver 
information center display.

See "Driver Information Center 
Messages" later in this section for 
more information.

If you get the low tire pressure 
warning, stop as soon as possible, 
check all the tires for damage 
and inflate them to the pressure 
value shown on the tire and load-
ing information label.

See "Tire and Loading Information 
Label" in Section 3 for more infor-
mation.

The warning will reappear each 
time the vehicle is started, until the 
low tire pressure condition is 
corrected.

If a problem is detected, the 
indicator light will flash for about 
one minute and then remain on 
for the rest of the ignition cycle.

The warning will reappear each 
time the vehicle is started until the 
problem is corrected.

See your dealer for service.

For more information, see "Tire 
Pressure Monitor" under "Tires" in 
Section 4.

$10araEscalade.fm  Page 39  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments