manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual, Page: 144 / 421

Share
Download
Cadillac Escalade Owner'S Manual Download Page 144

Instrumentation and Controls

. . . 144

The indicator light in the button 
will glow when the lock-out 
feature is activated.

You can control the passenger 
windows with the switches on the 
driver’s door while this feature is 
activated.

PROGRAMMING THE POWER 
WINDOWS

If electrical power to the windows 
is interrupted, you'll need to 
reprogram the express close 
feature for each front window.

To reprogram a window once 
electrical power is restored:

1. Make sure the ignition is on or 

in the accessory position, or 
that Retained Accessory Power 
is active.

2. Close all doors.

3. Press and hold the window 

switch to fully open the 
window.

4. Pull up the window switch to 

fully close the window and 
keep holding the switch for 
about two more seconds.

Release the switch.

5. Repeat the steps for the other 

front window.

$10araEscalade.fm  Page 144  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments