Cadillac Escalade Owner'S Manual Download Page 161

Page: 161 / 421

161 . . .

–

Section

6. Enter the switch positions.

Begin with switch

Use the following information
to program the proper switch
position.

- If a switch is "left", press the

left button.

- If a switch is in the middle,

press the middle button.

- If a switch is "right", press the

right button.

Repeat this step for each
switch setting.

7. To exit programming mode,

simultaneously press and
release all three universal
transmitter buttons.

The indicator lights should
turn on.

8. Choose which of the three

buttons you want to program.

9. Press and hold the desired

universal transmitter button
until the device moves.

The indicator light should
begin to blink slowly.

It may take up to 55 seconds
before you see movement.

10. Release the button when the

device moves.

The indicator light will blink
rapidly until programming is
complete.

11. Press and release the

programmed button.

The device should move to
confirm that programming is
successful.

If additional buttons are to be
programmed, repeat the previous
steps.

$10araEscalade.fm Page 161 Wednesday, October 14, 2009 9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Search results

Summary of Contents for Escalade

Reviews:

Related manuals for Escalade

Brands by name

Popular brands

Cadillac Escalade, Owner'S Manual

Search results

Summary of Contents for Escalade

Reviews:

Related manuals for Escalade

Brands by name

Popular brands