manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual

The Cadillac Escalade Personalization Manual is a comprehensive guide that allows owners to customize and personalize their luxurious vehicle to their exact preferences. This essential manual is available for free download from our website, providing easy access to all the instructions and tips needed to enhance your Escalade ownership experience.

Share
Download
background image

Instrumentation and Controls

. . . 154

To disable the power liftgate, press 
the bottom of the power liftgate 
button located on the overhead 
console.

Do not drive with the liftgate 
open, if possible.

If you must drive with the liftgate 
open, disable the power feature 
for the liftgate.

If the power liftgate is disabled, the 
liftgate may be opened or closed 
manually.

• To open the liftgate, press the 

touchpad on the handle on the 
outside of the liftgate and raise 
the liftgate.

• To close the liftgate, pull down 

on the handle. The power pull-
down feature firmly shuts the 
liftgate latch.

In extremely low temperatures, 
the power liftgate may be 
temporarily disabled.

Open or close the liftgate 
manually until the power liftgate 
function reactivates.

The 

REAR ACCESS OPEN

 (rear 

access open) message will appear 
in the Driver Information Center 
when the liftgate or liftglass is not 
completely closed.

A chime will also sound and the 
interior lights will turn on.

See "Driver Information Center" 
earlier in this section for 
information.

Obstruction Detection Feature

If the power liftgate presses 
against an obstruction while it is 
opening or closing, the liftgate 
automatically reverses direction.

A chime will also sound.

The power liftgate will function 
normally once the obstruction is 
removed.

If the power liftgate is not able 
to fully open or close because of 
multiple obstructions on the same 
cycle, the power function will 
deactivate when the liftgate 
contacts the obstruction and 
the liftgate will switch to manual 
operation.

$10araEscalade.fm  Page 154  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
Dometic GROUP DRS2 Installation And Operating Manual preview
DRS2
Brand: Dometic GROUP Pages: 20
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
Waeco MagicWatch MWE250 Installation And Operating Manual preview
MagicWatch MWE250
Brand: Waeco Pages: 172
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
Opel 2011 Insignia Owner'S Manual preview
2011 Insignia
Brand: Opel Pages: 254
tams elektronik 54-01016 Manual preview
54-01016
Brand: tams elektronik Pages: 44
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
Fortin Evo All THAR-FOR3 Installation Manual preview
Evo All THAR-FOR3
Brand: Fortin Pages: 7
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
Curtis 1POLXP1000RP Installation & Owner'S Manual preview
1POLXP1000RP
Brand: Curtis Pages: 6
Pontiac 2007 G6 Owner'S Manual preview
2007 G6
Brand: Pontiac Pages: 486
Vauxhall Crossland X 2017 Owner'S Manual preview
Crossland X 2017
Brand: Vauxhall Pages: 245
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Ford Fusion 2019 Supplement Manual preview
Fusion 2019
Brand: Ford Pages: 51

Brands by name

Popular brands

Load more brands