manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual

The Cadillac Escalade Personalization Manual is a comprehensive guide that allows owners to customize and personalize their luxurious vehicle to their exact preferences. This essential manual is available for free download from our website, providing easy access to all the instructions and tips needed to enhance your Escalade ownership experience.

Share
Download
background image

Instrumentation and Controls

. . . 152

Power Liftgate

CAUTION

You or others could be injured if 
caught in the path of the power 
liftgate. Make sure the path is 
clear before opening or closing 
the power liftgate.

NOTICE

Make sure that there are no 
overhead obstructions (such as 
a garage door) in the way of the 
liftgate before you open it. 
Otherwise, the liftgate glass 
could break and/or the liftgate 
could be damaged.

Your vehicle has a power liftgate.

To operate the power liftgate, the 
following conditions must be met:

• The liftgate must be in the 

completely open or 
completely closed position.

• The liftglass must be closed 

and latched.

• The transmission must be in 

P

 (Park).

If the transmission is moved 
out of 

P

 (Park) while the 

liftgate is moving, the liftgate 
will continue to open or close.

If you begin to drive before the 
liftgate is completely closed, 
the liftgate may stop and 
reverse direction to the full 
open position.

Do not drive with the liftgate 
open.

To use this feature, do any of the 
following:

• Press and hold the liftgate 

button on the remote keyless 
entry transmitter until the 
liftgate begins to open or close.

If you press the button again 
while the liftgate is in motion, 
the liftgate will reverse 
direction.

If the liftgate button is pressed 
while the power liftgate is 
disabled, the lights will flash to 
indicate that the power feature 
is inactive.

See "Remote Keyless Entry" in 
Section 3 for more information.

$10araEscalade.fm  Page 152  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
KAP AUDI 4G HIGHEND Manual preview
AUDI 4G HIGHEND
Brand: KAP Pages: 20
Q'STRAINT QLK-150 Installation Instructions Manual preview
QLK-150
Brand: Q'STRAINT Pages: 10
RAM 2500 2020 Quick Reference Manual preview
2500 2020
Brand: RAM Pages: 20
GMC SIERRA 2019 Getting To Know Your preview
SIERRA 2019
Brand: GMC Pages: 20
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
Rola LRSA2 Pack Contents & Fitting Instructions preview
LRSA2
Brand: Rola Pages: 3
Ford 2004 Freestar Workshop Manual preview
2004 Freestar
Brand: Ford Pages: 8
Intec CVD500LCD Installation And Operation Manual preview
CVD500LCD
Brand: Intec Pages: 16
AIS MAZMOD2 Manual preview
MAZMOD2
Brand: AIS Pages: 2
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
Joie i-Level Instruction Manual preview
i-Level
Brand: Joie Pages: 53
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
BraunAbility Rampvan Maintenance And Service Manual preview
Rampvan
Brand: BraunAbility Pages: 46
Waeco Perfect Fit MBM120 Installation Instructions preview
Perfect Fit MBM120
Brand: Waeco Pages: 3
Or-Fab HD Bumper Installation Instructions preview
HD Bumper
Brand: Or-Fab Pages: 4

Brands by name

Popular brands

Load more brands