manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual, Page: 112 / 421

Share
Download
Cadillac Escalade Owner'S Manual Download Page 112

Instrumentation and Controls

. . . 112

AUTOMATIC REAR AIR 
CONDITIONING/HEATING

Your vehicle is equipped with a 
rear climate control system.

The rear air conditioner/heater 
controls are integrated into the 
Rear Seat Audio system's control 
panel.

To operate the rear climate control 
system, do any of the following:

• Press 

REAR

 on the front climate 

control system to turn the 
system on and off.

The indicator light will glow 
when the system is on.

• Press the increase fan speed 

button 

, the mode button 

, 

or the plus (+) or minus (-) 
button on the rear control 
panel to turn the system on.

• Press 

 repeatedly to turn the 

system off.

The indicator light will turn off.

A

SRCE

PROG

C

B

$10araEscalade.fm  Page 112  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments