manualshive.com logo in svg

Cadillac Escalade, Owner'S Manual

The Cadillac Escalade Personalization Manual is a comprehensive guide that allows owners to customize and personalize their luxurious vehicle to their exact preferences. This essential manual is available for free download from our website, providing easy access to all the instructions and tips needed to enhance your Escalade ownership experience.

Share
Download
background image

109 . . .

–

Section 

1

This mode divides airflow 
between the windshield 
defroster vents, the floor 
outlets and the side 
window defroster vents.

Use this mode to remove 
fog from the windshield or 
side windows while also 
heating the vehicle.

The A/C compressor 
will automatically 
operate in this mode if 
the temperature is above 
4°C.

The recirculation function 
cannot be activated in this 
mode.

Do not drive the vehicle 
unless all windows are 
clear of fog, snow, ice 
or anything else that may 
obstruct your vision.

Defrosting

Press 

 to get fog or ice off the 

windshield and side windows.

This mode divides airflow between 
the windshield defroster vents, the 
floor outlets and the side window 
defroster vents.

The A/C compressor will automat-
ically operate in this mode if the 
temperature is above 4°C.

The recirculation function cannot 
be activated in this mode.

Do not drive the vehicle unless all 
windows are clear of fog, snow, ice 
or anything else that may obstruct 
your vision.

When defrost mode is selected, 
the passenger’s temperature 
setting cannot be changed.

If you press the passenger’s 
temperature knob when the 
defrost mode is active, the passen-
ger temperature display will flash 
three times to let you know that 
the function will not operate.

If the passenger’s temperature 
setting is adjusted while defrost 
mode is active, the driver’s 
temperature display will change. 
The passenger’s temperature will 
not be displayed.

If another air delivery mode is 
selected, the previous temperature 
settings will be displayed for the 
driver and passenger.

$10araEscalade.fm  Page 109  Wednesday, October 14, 2009  9:52 AM

Summary of Contents for Escalade






































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade

JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
OCTO SmartDiag2GO GD201-O User Manual preview
SmartDiag2GO GD201-O
Brand: OCTO Pages: 5
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
PEUGEOT 407 2010 Manual preview
407 2010
Brand: PEUGEOT Pages: 249
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Mercedes-Benz R 350 2012 Operator'S Manual preview
R 350 2012
Brand: Mercedes-Benz Pages: 368
Dakota Digital MCL-7000 Series Quick Start Manual preview
MCL-7000 Series
Brand: Dakota Digital Pages: 2
Volvo 2010 C30 Owner'S Manual preview
2010 C30
Brand: Volvo Pages: 284
Honda 2010 Pilot Technology Reference Manual preview
2010 Pilot
Brand: Honda Pages: 20
Kia 2009 Rio Series Owner'S Manual preview
2009 Rio Series
Brand: Kia Pages: 219
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
Tabernus Peram Hatch-bag Luggage System Installation Instructions Manual preview
Hatch-bag Luggage System
Brand: Tabernus Peram Pages: 10
Cadillac STS 2011 Owner'S Manual preview
STS 2011
Brand: Cadillac Pages: 529
Toro 07389 Installation Instructions Manual preview
07389
Brand: Toro Pages: 16

Brands by name

Popular brands

Load more brands