Bull NovaScale R460 E2, User Manual, Page: 466 / 490

F-10 Installing Windows Server 2003
15.
When Windows Server 2003 R2 has been installed, the [Windows Setup] screen will be displayed after logged on to
the system.
IMPORTANT:
„
In this case, the [Windows Setup] screen may not be displayed.
Be sure to install Microsoft Windows Server 2003 R2 DISC 2 according to the following
procedures.
„
You can install Microsoft Windows Server 2003 R2 DISC 2 after the application of "System
update".
Be sure to install Microsoft Windows Server 2003 R2 DISC 2.
In this case, note that the [Windows Setup] screen is not displayed.
16.
Insert Microsoft Windows Server 2003 R2 DISC 2 CD-ROM into the optical disk drive.
Confirm the parameters and click [OK].
17.
When the installation has completed, remove Microsoft Windows Server 2003 R2 DISC 2 CD-ROM from the optical
disk drive, and restart the system.
18.
When the installation has completed, be sure to execute the tasks described in "Driver Installation and Advanced
Settings" and "Updating the System" of manual.
Procedure for License Authentication
Product Key used in the procedure for license authentication should be matched with the COA label in which the product key
contained in Windows Server 2003 is written.
NOTES:
„
Execute the activation within 30 days. System may be locked after 30 days is passed.
„
COA label may be attached to your server.