Bull NovaScale R460 E2, User Manual, Page: 178 / 490

5-24 Installing the Operating System with Express Setup
Network Driver
Specify the details of network driver.
Two standard network drivers that are mounted will be installed automatically, but the link speed and Duplex mode need to be
specified manually.
1.
Open the [Device Manager].
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Link Speed] and specify the [Speed & Duplex] value the same as the value specified for HUB.
4.
Click [OK].
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be appeared from [Network and
Dial-up Connection].
NOTE: We recommend you to add [Network Monitor] at [Adding Services].
[Network Monitor] can monitor the frame (or the packet) that the computer installing [Network
Monitor] sends or receives. This tool is valuable when analyzing network trouble. For
information on how to install the tool, see the "Setting for Solving Problems" described later in
this chapter.
Optional Network Board Driver (Intel Pro/1000 MF, Pro/1000 MT, Pro/1000 GT, Pro/1000 PT)
The following optional network boards are available for the Intel Pro/1000 MF, Pro/1000 MT, Pro/1000 GT, Pro/1000 PT.
To use the INTEL PRO1000/PT Adapter, see" Using INTEL PRO1000/PT Adapter after System Update" in the previous page.
The drivers for other network boards are automatically installed by Windows Plug-and-Play. You do not need to install them
manually.