manualshive.com logo in svg

Bull NovaScale R460 E2, User Manual, Page: 28 / 490

Share
Download
Bull NovaScale R460 E2 User Manual Download Page 28

1-10    Notes on Using Your Server 

During Operation 

CAUTION

 

 

 
Do not pull out or remove the server from the rack unnecessarily. 
 

 

Do not pull out or remove the server from the rack unnecessarily. Pulling out or removing the server from 
the rack may cause not only the server to operate incorrectly but also the server to fall on people to make 
them injured. 

 

 
Stay away from the fan. 
 

 

Keep your hand or hair away from the cooling fan on the rear of the server. Failure to follow this warning 
may get your hand or hair caught in the fan, resulting in injury. 

 

 
Avoid contact with the server during thunderstorms. 
 

 

Disconnect the power plug from the outlet when a thunderstorm is approaching. If it starts thundering 
before you disconnect the power plug, do not touch any part of the server including the cables. Failure to 
follow this warning may cause a fire or an electric shock. 

 

 

 

 

 
Keep animals away from the server. 
 

 

Failure to follow this warning may cause a fire or an electric shock. 

 

 

 
Do not place any object on top of the server. 
 

 

The server may fall and cause property damage to the surroundings. 

 

 
Do not leave the server with its optical disk drive tray ejected. 
 

 

Dust may enter the server through openings and cause malfunctions of the server. Any person may also 
bump it and get injured. 

 

 

 

Summary of Contents for NovaScale R460 E2











































































































































































































































































































































































































































































































Reviews:

No comments