Bull NovaScale R460 E2, User Manual, Page: 23 / 490

Notes on Using Your Server 1-5
Power Supply and Power Cord Use
WARNING
Do not hold the power plug with a wet hand.
Do not disconnect/connect the plug while your hands are wet. Failure to follow this warning may cause
an electric shock.
Do not connect the ground wire to a gas pipe.
Never connect the ground wire to a gas pipe. Failure to follow this warning may cause a gas explosion.
CAUTION
Plug in to a proper power source.
Use a proper wall outlet. Use of an improper power source may cause a fire or a power leak.
Do not install the server where you need an extension cord. Use of a cord that does not meet the power
specifications of the server may heat up the cord and cause a fire.
Do not connect the power cord to an outlet that has an illegal number of connections.
The electric current exceeding the rated flow overheats the outlet, which may cause a fire.
Insert the power plug into the outlet as far as it goes.
Heat generation resulting from a halfway inserted power plug (imperfect contact) may cause a fire. Heat
will also be generated if condensation is formed on dusty blades of the halfway inserted plug, increasing
the possibility of fire.
Use the authorized power cord only.
Use only the power cord that comes with your server. Use of an unauthorized power cord may cause a fire
when the electric current exceeds the rated flow.
Also, observe the following to prevent an electric shock or fire caused by a damaged cord.
„
Do not stretch the cord harness.
„
Do not alter, modify, or repair the power cord.
„
Do not pinch the power cord.
„
Do not secure the power cord with staples or equivalents.
„
Do not bend the power cord.
„
Do not use any damaged power cord. (Replace a damaged
power cord with a new one of the same specifications. Ask
your service representative for replacement.)
„
Keep chemicals away from the
power cord.
„
Do not twist the power cord.
„
Do not place any object on the
power cord.
„
Do not bundle power cords.
Do not use the attached power cord for any other devices or usage.
The power cord that comes with your server is designed aiming to connect with this server and to use with
the server, and its safety has been tested. Do not use the attached power cord for any other purpose.
Doing so may cause a fire or an electric shock.