Bull NovaScale R460 E2, User Manual, Page: 343 / 490

Upgrading Your Server 9-47
PROCESSOR (CPU)
The server may have another CPU installed in addition to the standard CPU (Intel
®
Xeon
®
Processor).
IMPORTANT:
„
The CPU is extremely sensitive to static electricity. Make sure to touch the metal frame of the
server to discharge static electricity from your body before handling the CPU. Do not touch the
CPU pins by a bare hand or place the CPU directly on the desk. For static notes, see the section
"Anti-static Measures" described earlier.
„
Do not operate the system until confirming that the additionally installed CPU is in normal
state.
„
Make sure to use the CPU authorized by Bull Installing a third-party CPU may cause a failure
of the CPU as well as the server. Repair of the server due to failures or damage resulted from
installing such a board will be charged.
Processor 2
Processor 1
FRONT REAR
Mother board
NOTE:
If the different revision of the processor is installed in the multiprocessor system,
Windows logs the following information every startup. If this message is logged, it is no problem
for operation.