Bull NovaScale R460 E2, User Manual, Page: 465 / 490

Installing Windows Server 2003 F-9
12.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra160 SCSI Cards (Win Server 2003)] and press
Enter .
IMPORTANT:
If the following message is displayed when you use the ADAPTEC 29160LP
SCSI controller, press S .
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra 160 SCSI Cards (Win Server
2003)"
Unless the device manufacturer prefers that
you use the driver on the floppy disk, you
should use the driver in Windows.
The screen of Step 5 is displayed.
Press
Enter , and go to Step 13.
13.
When the following message is shown, press Enter to start "Welcome to Setup".
IMPORTANT:
If you install Windows Server 2003 on the hard disk larger than
2,097,152MB(2TB), you can specify only a value equal to or less than 2,097,152MB as partition
size.
14.
When the installation of Windows Server 2003 has finished, the system reboots automatically.
–
Windows Server 2003 has installed: Go on the step 14
– Windows Server 2003 R2 has installed: Go on the step 11