Bull NovaScale R460 E2, User Manual, Page: 39 / 490

General Description 2-5
1 Handles (1 at the right and left each)
Hold the handles when dismounting/mounting the server from/in the rack.
2 Floppy disk drive bay
Mount an optional floppy disk drive in this bay.
3 Optical disk drive
This drive reads data from the disc.
3-1 Emergency hole
3-2 Disk access LED 3-3 Tray eject button
4 Hard disk drive bays
Mount hard disk drives in the bays. Each number following the bold-faced number indicates
the port number. In the standard configuration, the hard disk drive trays are mounted in all
the bays.
5 DISK LED (green/amber)
Hard disk drive LED. Each hard disk drive LED is green during access to the hard disk drive.
The LED turns amber when the hard disk drive fails. The LED flashes switching back and
forth between green and amber during build processing (only in RAID System).
6 Backup device bay
Mount an optional tape drive in this bay.
7 UID (Unit ID) switch
Press this switch to turn on/off the UID LEDs on the front and rear panels of the server.
Pressing the switch once turns on the LEDs. Pressing it again turns them off.
(The LED also goes on or flashes when software issues a command.)
8 POWER switch
Press this switch to turn on/off the power. Pressing the switch once turns on the power, and
the POWER LED goes on. Pressing it again turns off the power. Keep pressing the switch for
4 seconds or more forcibly turns off the power.
9 RESET switch
Press this switch to reset the server.
10 DUMP switch (NMI switch)
Press this switch to dump memory.
11 USB connectors (2 ports)
Connect device compliant with the USB interface to the connectors.
12 Monitor connector
Connect with the display unit (exclusively used with the monitor connector on the rear panel)
13 Slide tag
A label for indicating the serial number or name of the server.