manualshive.com logo in svg

Bull NovaScale R460 E2, User Manual, Page: 27 / 490

Share
Download
Bull NovaScale R460 E2 User Manual Download Page 27

Notes on Using Your Server    1-9 

Cleaning and Working with Internal Devices 

WARNING

 

 

 
Do not disassemble, repair, or alter the server. 
 

 

Never attempt to disassemble, repair, or alter the server on any occasion other than described in this 
User's Guide. Failure to follow this instruction may cause an electric shock or fire as well as 
malfunctions of the server. 

 

 

 

 
Do not remove the lithium battery. 
 
The server contains the lithium battery. Do not remove the battery. Placing the lithium close to a fire or 
in the water may cause an explosion. 

 

 

 

When the server does not operate appropriately due to the dead lithium battery, contact your service 
representative. Do not disassemble the server to replace or recharge the battery by yourself. 

 

 
Disconnect the power plug before cleaning the server. 
 
Make sure to power off the server and disconnect the power plug from a power outlet before cleaning or 
installing/removing internal optional devices. Touching any internal device of the server with its power 
cord connected to a power source may cause an electric shock even of the server is off-powered. 

 

 
Disconnect the power plug from the outlet occasionally and clean the plug with a dry cloth. Heat will be 
generated if condensation is formed on a dusty plug, which may cause a fire. 

 

 

 

CAUTION

 

 

 
Avoid installation in extreme temperature conditions. 

 

 

Immediately after the server is powered off, its internal components such as hard disk drives are very 
hot. Leave the server until its internal components fully cool down before installing/removing any 
component. 

 

 
Make sure to complete board installation. 
 

 

Always install a board firmly. An incompletely installed board may cause a contact failure, resulting in 
smoking or fire. 

 

 
Do not touch any electrical components inside the server during the hot-swap replacement. 
 

 

All power flows inside the server while the hot-swap replaceable components (hard disk, cooling fan and 
power supply). Do not touch the electrical components inside the server to avoid an electric shock. 

 

 

Summary of Contents for NovaScale R460 E2











































































































































































































































































































































































































































































































Reviews:

No comments