Bull NovaScale R460 E2, User Manual, Page: 102 / 490

4-18 Configuring Your Server
Console Redirection Submenu
Option Parameter Description Your Setting
BIOS Redirection
Port [Disabled]
Serial Port A
Serial Port B Specify the address/interrupt of the serial port to which
a remote console is connected.
Baud Rate 9600
[19.2K]
38.4K
57.6K
115.2K Specify the baud rate used for the interface with
successive remote consoles.
Flow Control None
Xon/Xoff
[CTS/RTS]
CTS/RTS+CD Specify the flow control method.
Console Type PC ANSI
[VT100+]
VT-UTF8 Specify the type of remote console.
Continue
Redirection after
POST Disabled
[Enabled] Specify whether to continue console redirection feature
after completion of POST.
Remote Console
Reset [Disabled]
Enabled Specify whether to enable or disable resetting by
Escape command (Esc R) sent from the remote
console.
If the server is connected with the management PC
that uses NEC ESMPRO Manager, this option is
always enabled even if "Disabled" is specified here.
[ ]: Factory-set