Bull NovaScale R460 E2, User Manual, Page: 304 / 490

9-8 Upgrading Your Server
HARD DISK DRIVE
The hard disk drive bay at the front of the server chassis may contain hard disk drives of approximately 25.4 mm (1 inch) high.
The disk interface, number and size of hard disk drives depend on server model, as described below. The IDs of hard disk drive
(channel numbers or port numbers) are also predefined.
You may purchase the hard disk drive with dedicated drive carrier.
3.5-inch Disk Model
IMPORTANT:
„
Do not use any hard disk drives that are not authorized by Bull. Installing a third-party hard
disk drive may cause a failure of the server as well as the hard disk drive. Purchase hard disk
drives of the following models:
– 250GB, 7200rpm, SATA2/300
– 500GB, 7200rpm, SATA2/300
– 750GB, 7200rpm, SATA2/300
– 1TB, 7200rpm, SATA2/300
– 73.2GB, 15000rpm, SAS
– 146.5GB, 15000rpm, SAS
– 300GB, 15000rpm, SAS
– 450GB, 15000rpm, SAS
„
The Internal RAID Controller supports RAID levels 0, 1, 5, and 6.
To use RAID 5 or RAID 6, you need to additionally install the optional RAID Upgrade Kit.
The hard disk drive bay may contain up to six hard disk drives. The port numbers are factory-assigned to hard disk drives as
shown below.