Bull NovaScale R460 E2, User Manual, Page: 25 / 490

Notes on Using Your Server 1-7
Installation, Relocation, Storage, and Connection
WARNING
Disconnect the power cord(s) before installing or removing the server.
Make sure to power off the server and disconnect the power cord(s) from a power outlet before
installing/removing the server. All voltage is removed only when the power cords are unplugged.
CAUTION
Never attempt to lift the server only by yourself.
The server weighs max. 31 kg (depending on its hardware configuration). Carrying the server only by
yourself may strain your back. Hold the server firmly by its bottom with another person to carry it. Do not
hold the front door to lift the server. The front door may be disengaged from the server, causing
personal injury.
Do not install the server in any place other than specified.
Do not install the server in the following places or any place other than specified in this User's Guide.
Failure to follow this instruction may cause a fire.
„
a dusty place
„
a humid place such as near a boiler
„
a place exposed to direct sunlight
„
an unstable place
Do not install the server on a rack with leaving covers removed.
Do not install the server on a rack with the cover being removed. Failure to follow this instruction may
reduce the cooling effect in the server to result in some malfunction and/or dusts to enter the server to
result in a fire or electric shock.
Do not pinch your finger with rails or other components.
Note sufficiently that your fingers may not be caught between a rail and another mechanical part or cut
by a rail at installation or removal of the server from the rack.
Do not apply any load on the server pulled out from the rack.
Do not apply any load on the server pulled out from the rack. Doing so bends the frame of the server.
Consequently, the server cannot be pushed back into the rack. Placing an object on the server may also
cause personal injury if the server drops.