Bull NovaScale R460 E2, User Manual, Page: 207 / 490

Installing the Operating System with Express Setup 5-53
SETTING FOR SOLVING PROBLEMS
Setup the following issue in advance so that your computer can recover from any trouble precisely and as soon as possible
when it should occur.
Memory Dump (Debug Information) - Windows Server 2008 -
This section describes the procedures for collecting memory dump (debug information) in the server.
IMPORTANT: Cautions for the Memory Dump
„
The staff of maintenance service representative is in charge of collecting memory dump.
Customers need only to specify the memory dump.
„
If any trouble occur after specifying the process below, the message to inform that the system
is in short of virtual memory may appear, but continue to start the system. If you restart the
system in such case, memory dump may not be stored correctly.
Follow the procedure below to specify.
1.
Select [Control Panel] and click [System].
The [System] dialog box appears.
2.
Click [Advanced system settings].
The [System Properties] dialog box appears.
3.
Select [Advanced] tab.
Click [Settings] on the [Startup and Recovery] group box.
4.
Modify [Dump file:] in the [Write debugging information] group box.
e.g. Write the debug information in D drive with the file name "MEMORY.DMP".
D:\MEMORY.DMP