Bull NovaScale R460 E2, User Manual, Page: 271 / 490

Troubleshooting 8-17
‰
Is BIOS configuration correct?
→
The internal LAN controller may be disabled with the BIOS SETUP utility of the server. Check the setting
with the BIOS SETUP utility.
<Menus to check:
[Advanced] - [PCI Configuration] - [Onboard LAN] - [LAN Controller]>
‰
Have the protocol and service already configured?
→
Install the distinctive network driver for the server. Make sure that the protocol, such as TCP/IP, and services
are properly specified.
‰
Is the transfer speed correct?
→
Open the network property dialog box in control panel to specify the "Link Speed & Duplex" value the same
as the value specified for HUB.
Wake on LAN does not start from standby or paused state.
→ WOL (Wake On Lan) is not available while the system is in standby or paused state.
Event logs in using Intel Network adapter teaming
Event Type: Warning
Event Source: IANSMiniport
Event Category: None
Event ID:
11
Description: Adapter link down: Intel(R)PRO/1000 ----
Event Type:
Warning
Event Source: IANSMiniport
Event Category: None
Event ID:
13
Description: Intel(R)PRO/1000 ---- has been deactivated from the team.
Event Type:
Warning
Event Source: IANSMiniport
Event Category: None
Event ID:
16
Description: Team #0: The last adapter has lost link.
Team network connection has been lost.
Event Type:
Warning
Event Source: IANSMiniport
Event Category: None
Event ID:
22
Description: Primary Adapter does not sense any Probes:
Intel(R)PRO/1000 ---- Possible reason: partitioned Team.
→
Above-mentioned event log will appear when the system starts.
There is no problem in LAN driver operation.