manualshive.com logo in svg

Bull NovaScale R460 E2, User Manual, Page: 182 / 490

Share
Download
Bull NovaScale R460 E2 User Manual Download Page 182

5-28    Installing the Operating System with Express Setup 

Graphics Accelerator Driver 

If you use standard graphics accelerator drivers, update your system with ExpressBuilder DVD attached to your system. 
Standard graphics accelerator drivers will be installed automatically. 
Please refer to "Graphics Accelerator Driver" described in Appendix D-25 when you want to reinstall the driver individually. 
 

Installing SCSI Controller Driver (ADAPTEC 29320ALP/ADAPTEC 29160LP/ADAPTEC 

ASC-29320LPE)

 

If you use the SCSI Controller ADAPTEC 29320ALP/ADAPTEC 29160LP/ADAPTEC ASC-29320LPE, you do not need to 

install the driver manually. It is automatically installed by Windows Plug-and-Play. 
 
 

Installing SAS Controller Driver (LSI LOGIC SAS3442E-R)

 

If you use the SAS Controller LSI LOGIC SAS3442E-R, you do not need to install the driver manually. It is automatically 

installed by Windows Plug-and-Play. 

 

Installing RAID Controller Driver (SAS CTRL 8708EM2)

 

If you use the RAID Controller SAS CTRL 8708EM2, you do not need to install the driver manually. It is automatically 

installed by Windows Plug-and-Play. 
 

Installing Fibre Channel Controller Driver (EMULEX LPE1150/Emulex LPe11002) 

If you use the Fibre Channel Controller EMULEX LPE1150/Emulex LPe11002, you do not need to install the driver manually. 

It is automatically installed by Windows Plug-and-Play. 
 

Summary of Contents for NovaScale R460 E2











































































































































































































































































































































































































































































































Reviews:

No comments