manualshive.com logo in svg

Bull NovaScale R460 E2, User Manual, Page: 204 / 490

Share
Download
Bull NovaScale R460 E2 User Manual Download Page 204

5-50    Installing the Operating System with Express Setup 

When PROSet is installed 

1. 

Start Device Manager. 

2. 

Point to [Network adapters] and double click [Intel(R) 82576 Gigabit Dual Port Server Network 

Connection]/[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2] to open the adapter [Properties]. 

3. 

Click [Power Management] tab and change setting in [Wake On LAN] according to the following list. 

Setting item

 

Default setting

 

Change setting

 

"Wake On Directed Packet"

 

ON

 

ON

 

"Wake On Magic Packet"

 

ON

 

ON

 

"Wake on Magic Packet from power off state"

 

OFF

 

ON

 

 

NOTES:

   

„

 

[Power Saver Options] setting is not necessary to change. 

„

 

Above setting will be maintained until manually resetting are executed. 

 

IMPORTANT:

 The parameters of [Wake On LAN] will not exist, if the network ports are not 

available for WOL. 

4. 

Click [OK]. 

5. 

Reboot the system. 

 

Summary of Contents for NovaScale R460 E2











































































































































































































































































































































































































































































































Reviews:

No comments