Brother 82-W20, Operation Manual

Page: 87 / 420

SEWING
Se
w
in
g Ba
sics
85
2
a
Press .
b
Display page 2 of the Sewing Settings
screen.
c
Select the functions to be performed by the
multi-function foot controller.
d
Press .
Sewing Reinforcement Stitches
Reverse/reinforcement stitches are generally
necessary at the beginning and end of sewing. You
can use the “Reverse Stitch” button to sew reverse/
reinforcement stitches. When you keep pressing
“Reinforcement Stitch” button, the machine will
sew reinforcement stitch at that point 3 to 5
stitches, and then stop. (see page 17)
a “Reverse Stitch” button
b “Reinforcement Stitch” button
If the automatic reinforcement stitch is selected on
the screen, reverse stitches (or reinforcement
stitches) will be sewn automatically at the
beginning of sewing when the “Start/Stop” button
is pressed. Press “Reverse Stitch” button or
“Reinforcement Stitch” button to sew reverse
stitches (or reinforcement stitches) automatically at
the end of sewing (Refer to the next procedure
“Automatic Reinforcement Stitching”.).
a
Reverse stitch
b
Reinforcement stitch
The operation performed when the button is
pressed differs depending on the selected pattern.
(Refer to “STITCH SETTING CHART” on
page 404.)
Automatic Reinforcement
Stitching
After selecting a stitch motif, turn on the automatic
reinforcement stitching function before sewing,
and the machine will automatically sew
reinforcement stitches (or reverse stitches,
depending on the stitch motif) at the beginning
and end of sewing.
a
Select a stitch pattern.
b
Press to set the automatic
reinforcement stitching function.
→
The key will display as .
Memo
• When you press the “Reinforcement Stitch”
button while sewing character/decorative
stitch pattern, you can end sewing with a
full stitch instead of at a mid-point.
• The green light on the right of the
“Reinforcement Stitch” button lights up
while the machine is sewing a full motif, and
it automatically turns off when the sewing is
stopped.