Brother 82-W20 Operation Manual Download Page 194

Page: 194 / 420

USING THE MEMORY FUNCTION

192

Press .

Press

to return to the original screen without

saving.

→

The stitch pattern will be temporarily saved to
“Removable Disk” under “Computer (My
Computer)”.

Select the stitch pattern’s .pmv file and
copy the file to the computer.

Retrieving Stitch Patterns from
the Machine’s Memory

Press .

→

The pocket selection screen appears.

Choose a stitch pattern to retrieve.

If the entire saved stitch pattern is not displayed,
press the thumbnail.

Press

to return to the original screen without

saving.

Saved stitch patterns

Note

• Do not turn off the machine while the

“Saving” screen is showing. You may lose
the data.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands