Brother 82-W20, Operation Manual

Page: 208 / 420

USING STORED CUSTOM STITCHES
206
Storing Custom Stitches in Your
List
Stitch patterns created using the MY CUSTOM
STITCH function can be stored for later use. Once
you finish entering the stitch data, press
,and
choose where to save data. The “Saving” message
appears and the stitch will be stored.
Before storing a stitch, press to sew a test-
run of the stitch.
■
If the Memory is Full
If the following message appears after is
pressed, the stitch pattern cannot be stored because
either the machine’s memory is full or the stitch
pattern being stored is larger than the amount of
space available in the memory. To be able to store
the stitch pattern in the machine’s memory, a
previously stored stitch pattern must be deleted.
Refer to “Retrieving Stored Stitches” on page 206.
Retrieving Stored Stitches
a
Press .
b
Select the device to retrieve the pattern
from.
USING STORED CUSTOM STITCHES
Memo
• Storing a stitch pattern takes a few
seconds.
• For details on retrieving a stored stitch
pattern, see page 206.
Note
• Do not turn off the machine while the
“Saving” message is displayed, otherwise
the stitch pattern data being saved may be
lost.
Memo
• You can also retrieve the stitches by the
procedure to retrieve the Decorative/
Character stitches. Refer to the page 192 to
194.