Brother 82-W20 Operation Manual Download Page 299

Page: 299 / 420

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)

Ad
va

ced

297

Selecting a Pattern

Patterns combining embroidery and printed

designs appears with

and

Select a pattern combining embroidery and
printed designs.

→

Only the embroidery pattern (not the background
image of the selected embroidery pattern) is
displayed.

■

Checking the Combined Image

Press .

→

An image of the pattern combined with the
background appears.

To return to the image of only the embroidery

design, press

Outputting the Background
Image and Positioning Image

Use USB media or the computer to output the
following three images from the machine.

File name may differ depending on the PDF file
selected.

•

[xxx]r.pdf (Example: E_1r.pdf)

An image flipped on a vertical axis (for an iron-
on transfer)

•

[xxx]n.pdf (Example: E_1n.pdf)

An image that is not flipped (for printing on
printable fabric)

•

[xxx]p.pdf (Example: E_1p.pdf)

An image that is not flipped, but has positioning
marks attached (for positioning)

Memo

• Refer to the Quick Reference Guide for the

detail of patterns which enable this function.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands