Brother 82-W20 Operation Manual Download Page 62

Page: 62 / 420

LOWER THREADING

Remove the bobbin cover.

Hold the bobbin with your right hand and
hold the end of the thread with your left
hand.

Set the bobbin in the bobbin case so that
the thread unwinds to the left.

Hold the bobbin lightly with your right
hand, and then guide the thread with your
left hand.

Pass the thread through the guide, and then
pull the thread out toward the front.

Cutter

→

The cutter cuts the thread.

Insert the tab in the lower-left corner of the
bobbin cover (1), and then lightly press
down on the right side to close the cover
(2).

Press

to unlock all keys and buttons.

Note

• If the thread is not correctly inserted

through the tension spring of the bobbin
case, it may cause incorrect thread tension.
(see page 92)

Tension spring

CAUTION

• Be sure to hold down the bobbin with your

finger and unwind the bobbin thread
correctly. Otherwise, the thread may break or
the thread tension will be incorrect.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands