Brother 82-W20 Operation Manual Download Page 184

Page: 184 / 420

EDITING STITCH PATTERNS

182

Checking the Image

You can display an approximate size image of the
selected stitch pattern. You can also check and
change the colors of the image on the screen.

Press .

→

An image of the selected pattern is displayed.

Press

to change the thread color in

the image to red, blue, black or yellow.

→

The color changes every time you press the button.

Press

to display the enlarged image.

Use

to view any part of the

image that extends out of the viewable
display area.

Press

to return to the original screen.

Memo

• You can also sew from this screen when the

presser foot symbol is displayed.

• Image of some patterns will display in

default size only.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands