Brother 82-W20 Operation Manual Download Page 196

Page: 196 / 420

USING THE MEMORY FUNCTION

194

Press

when there is a subfolder to sort

two or more stitch patterns to USB media,
the stitch pattern in the subfolder is
displayed.

Press

to return to the original screen without

recalling.

Folder name

Stitch patterns in a folder show only the first
pattern of any combined patterns.

Path

→

The path shows the current folder at the top of the
list.
Stitch patterns and a subfolder within a folder are
displayed.

Press

to return to the previous folder.

Use the computer to create folders. Folders cannot
be created with the machine.

Press the key of the stitch pattern you want
to recall.

Press .

Press

to delete the stitch pattern. The pattern

will be deleted from the USB media.

→

The selected stitch pattern is recalled and the sewing
screen will be displayed.

Recalling from the Computer

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine (see page 191).

On the computer, open “Computer (My
Computer)” then go to “Removable Disk”.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands