Brother 82-W20 Operation Manual Download Page 278

Page: 278 / 420

EMBROIDERING AN PATTERN

276

Spool Stand LED

This machine is equipped with a spool stand LED.
Its lighting status and color indicate the machine
status and thread color for embroidering.

Spool stand LED

■

When Not Using the Spool Stand
LED

Press .

→

The General settings screen appears.

Display page 5 of the Embroidery settings

screen.

Set “Spool Stand LED” to “OFF”.

Press

to return to the original screen.

Using Appliqués

This machine can sew patterns that contain an
appliqué. Follow the procedure described below

to sew patterns with

(appliqué piece),

(appliqué position) and

(appliqué) in the embroidery color order display.

Required materials

• Fabric for the appliqué piece

• Fabric for the appliqué base

• Stabilizer material

• Craft glue

• Embroidery thread

Memo

• Use the color in which the LED lights up as

a guide. Since the actual embroidery thread
color may differ slightly, be sure to also
check the thread color number in the LCD.

Lit

Lights up in thread color for
embroidering

Lit (color changing)

Indicates thread spool replacement
(then lights up in embroidery thread
color)

Flashing (red)

Error

Flashing (green)

End of stitching

Memo

• When embroidering a pattern with

uninterrupted embroidering, the LED lights
up in gray.

• When embroidering an appliqué pattern, the

LED light indicates no color while

embroidering “

APPLIQUE

MATERIAL”, “

APPLIQUE

POSITION” or “

APPLIQUE”.

1. Create the appliqué piece.

2. Sew the appliqué position on the base

fabric.

3. Affix the appliqué piece to the base

fabric.

4. Embroider the remainder of the pattern.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands