Brother 82-W20 Operation Manual Download Page 242

Page: 242 / 420

EDITING PATTERNS

240

Press

and then press

Press .

→

The “Saving” screen is displayed. When the data is
loaded to the machine, the display returns to the
original screen automatically.

The recalled custom thread table is
displayed on the screen.

Choosing a Color from the
Custom Thread Table

You can select a color from the up to 300 thread
colors you have set in the custom thread table.

Press .

→

The thread color palette screen displays.

Press the thread color key you want to
change.

Press

to display the thread color that is not

on the screen.

→

The selected thread color image is displayed.

Press .

Custom thread change key

→

The custom thread table will appear.

Note

• Do not insert or remove USB media while

“Saving” screen is displayed. You will lose
some or all of the data you are saving.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands