Brother 82-W20 Operation Manual Download Page 77

Page: 77 / 420

CHANGING THE NEEDLE

etting

Re
ad

Press the “Needle Position” button to raise
the needle.

Press

to lock all keys and buttons.

If the message “OK to automatically lower the
presser foot?” appears on the LCD screen, press

to continue.

Use the screwdriver to turn the needle
clamp screw toward the front of the
machine and loosen the screw. Remove the
needle.

CHANGING THE NEEDLE

CAUTION

• Always press

on the screen to lock all keys and buttons before changing the needle. If

is not

pressed and the “Start/Stop” button or another operation button is pressed accidentally, the machine will
start and injury may result.

• Use only sewing machine needles made for home use. Other needles may bend or break and may cause

injury.

• Never sew with a bent needle. A bent needle will easily break and may cause injury.

Memo

• To check the needle correctly, place the flat

side of the needle on a flat surface. Check
the needle from the top and the sides.
Throw away any bent needles.

Parallel space

Level surface (bobbin cover, glass, etc.)

Note

• Before replacing the needle, cover the hole

in the needle plate with fabric or paper to
prevent the needle from falling into the
machine.

Note

• Do not apply pressure to the needle clamp

screw. Doing so may damage the needle or
machine.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands