Brother 82-W20 Operation Manual Download Page 230

Page: 230 / 420

EDITING PATTERNS

228

Changing the Size of the Pattern

Press .

Select the direction in which to change the
size.

Size of the pattern

Press .

Enlarge the pattern proportionately.

Decrease the pattern proportionately.

Stretch the pattern horizontally.

Decrease the pattern horizontally.

Stretch the pattern vertically.

Decrease the pattern vertically.

Return the pattern to its original appearance.

Memo

• Some patterns or characters can be

enlarged more than others.

• Some patterns or characters can be

enlarged to a greater degree if they are
rotated 90 degrees.

• You can change the size of the pattern by

rotating the mouse wheel. Rotate the
mouse wheel away from you to shrink the
pattern. Rotate the mouse wheel toward
you to enlarge the pattern.

• You can move patterns using

the window.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands