Brother 82-W20 Operation Manual Download Page 204

Page: 204 / 420

ENTERING STITCH DATA

202

Repeat the steps above for each point that
you have drawn on the grid sheet until the
stitch design is drawn on the screen as a
continuous line.

Press

to delete a selected point entered.

Press

to sew a test-run of the stitch.

Press

to return to the original screen.

Press

to view an image of the stitch.

■

Moving a Point

Press

to move

to the point

that you want to move.

To move

to the first point, press

To move

to the last point, press

Use

to move the point.

You can also move

by using the touch pen.

Memo

• If you have entered points that are too close

together, the fabric may not feed properly.
Edit the stitch data to leave a larger space
between points.

• If the stitch design is to be repeated and

linked, make sure that linking stitches are
added so that the stitch designs will not
overlap.

Linking stitches

• You can touch on the grid sheet to set the

point, or you can also use a USB mouse.

Summary of Contents for 82-W20





































































































































































































































































































































































































































Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands

Brother 82-W20, Operation Manual

Search results

Summary of Contents for 82-W20

Reviews:

Related manuals for 82-W20

Brands by name

Popular brands